If you have obstructions on the side of the trailer that would prevent the door from swinging all the way open then you will want to consider using either an angled door keeper like the 45-Degree T-Style Hook and Keeper Door Holder part # 37211765 or an extended one like the T-Style Hook and Keeper Door Holder for RV or Enclosed Trailer part # 37210515 for 4" or part # 37210525 for 6". In order to confirm fit you will need to measure to see how far away from the trailer the door can get... view full answer...
To match your 1" long plunger you'll want the Plunger and Nylon Socket Door Holder # DH604. Just like with your old door holder these will hold your trailer doors open with ease by mounting one part to the door and the other to the side of your trailer. They create a 1" gap between trailer and door when in use. All metal parts are zinc plated to resist rust and corrosion. view full answer...
Yes they can. The Conventional Ramp Door Spring for 8' Wide Enclosed Trailer - Dual Spring part # ERS160D96 that you looked at is designed to accommodate a wide range of door openings. You can use the same attachment points your current door spring uses and have the added benefit of dual springs and cables. Any excess you may have on the cross tube can be cut to accommodate your trailer. view full answer...
I do not see any reason that you will not be able to use the Conventional Ramp Door Spring for 8' Wide Enclosed Trailer # 362SA8207 on your trailer. You will have to make sure that the top door is opened before the bottom half since the angle of the cable will drag on the top of the door if it is closed. view full answer...
The Polar Heavy-Duty Cam Action Door Lock for Enclosed Trailers # PLR258-002 that you referenced will work well for you to add dual cam door locks to the dutch doors and ramp of your horse trailer.
This cam action door lock can work for both right or left hand doors, so the same part number with work for both of the dutch doors on your trailer. The # PLR258-002 is designed for use with a 3/4 inch pipe, which is not included. This pipe can be found at your local hardware store. view full answer...
No, Curt trailer hitch # C13222 will not fit the 1999 Honda Passport with the door mounted spare tire, it only fits models with the spare tire stowed under the vehicle. For models like yours that have the door mounted spare you can use Curt trailer hitch # C13235.
To complete your towing set up I recommend etrailer ball mount kit # 989900. It includes 2 ball mounts, 2 balls, a hitch pin with clip, and a storage bag. And for trailer wiring use # 118360. I have linked a video showing how... view full answer...
You can seal the frame of the door with TremPro 644 Silicone Sealant part # 0160299. I contacted Ultra-fab and the access door part # UF48-979010 is not considered waterproof or water resistant. They also do not have a seal or gasket available. The sealant can be applied on the back of the access door frame to create a waterproof seal between the door and the trailer wall during installation or around the door frame to create a waterproof seam once the access door is installed.
Ultra-fab... view full answer...
While there are replacement door latches that may work for your 2004 Fleetwood, trailer manufacturers do not keep a list or database of parts for years, makes and models of trailer so we would not have access to information about the door on your trailer.
To get the correct replacement latch you would need to know the manufacturer of the door and if it is a Global Link, Bauer, Lippert Components, Fastec (FIC), or TriMark standard entry door latch you can use the Global Link RV Entry Door... view full answer...
I spoke with my contact at Redneck about the Enclosed Trailer Ramp Spring, part # CB250D96SHD on your trailer. They told me that the pipe that the springs and cable assemblies are attached to can be cut down to work on your 84 inch door.
If you decide you want the shorter ramp spring for enclosed trailers that part # is ERS120D81.
The installation instructions for this product are recommended for individuals who have experience winding torsion springs. If you have not worked with a... view full answer...
It is possible the Valterra Keyed Entry Door Knob w/ Interior Lever for RVs - Stainless Steel part # L32CS000 will fit the 1986 wilderness trailer. The only way to know for sure is to measure the door you want to install the knob in. The door needs to be 1-3/8" to 1-5/8" thick. It also needs to have 2-3/8" to 2-3/4" from center of the face hole (where the lock installs) to leading edge of door for the locking mechanism to work properly. If your door fits these measurements the Valterra... view full answer...
I don't have any specs on the door latch for your 1998 Featherlite 8546 Trailer but so long as the door is between 1-1/4" to 1-1/2" thick and you have or can make a 2-1/2" wide x 3-1/2" tall to 3" wide x 4" tall cutout then the Global Link RV Entry Door Locking Latch Kit part # 295-000019 will work for you.
I have attached a review video for you as well. view full answer...
The lift assist bracket that installs inside the door frame in the SolidStep Lift Assist Kit part # LC733939 for 30" to 36" RV Doors and lift assist kit part # LC733937 for 26" to 29" RV door frames installs 1/4 inch away from the door frame.
I contacted SolidStep and the bracket in the LC733939 kit is 20-3/4 inches wide and the bracket in the LC733937 kit is 24 inches wide. view full answer...
The correct replacement magnetic door switch for your Kwikee Electric RV Steps is the Replacement Magnetic Door Sensor for Kwikee Electric RV Steps part # LC369299. The switches are only sold as a complete assembly with both the door and trailer side but if you only need one you can just simply take the one you need from the kit and use the other as backup. view full answer...
Yes, the item you selected, CURT Trailer Hitch, part # 13842, is designed specifically and will fit your 2004 Nissan Frontier 4-door long bed.
To complete your towing setup, you may be need the following items:
Convert-A-Ball Ball Mount, part # AMSC2
Hopkins Wiring, part # 33515
1-7/8 Inch Hitch Ball, part # 19260
2 Inch Hitch Ball, part # 19247
Pin and Clip, part # PC3
I have linked an FAQ on trailer hitch installation tips. I have also linked a video installation of a hitch on a 2-door... view full answer...
Valterra Keyed Entry Door Knob w/ Interior Lever for RVs # L32CS000 may work for your 13' 1964 Lolinner, although we do not have any type of database with parts from years, makes and models of trailer.
You will need to know how thick the door on your trailer is, as this knob will only work with 1-3/8" to 1-5/8" thick RV doors, and your door also must have between 2-3/8" to 2-3/4" from the center of the face hole (where the knob actually installs) to the leading edge of your door. view full answer...
The SolidStep Manual Fold-Down Steps part # LC791575 are secured in the upright position by a striker which catches the lip on the door frame. I have attached a photo of this for you. In regards to compatibility with a screen door, this shouldn't be an issue for most screen doors as the steps actually sit inside the trailer. The only part that sits inside the door frame is the striker mechanism above which so long as it does not align with the screen door bar there would most likely be... view full answer...
The Global Link RV Entry Door Locking Latch Kit # 295-000002 referenced in your question may work great on the door of your 1967 Tradewinds Yachtsman but unfortunately trailer manufacturers don't keep track of smaller parts like these that are installed at the factory so I'm not able to confirm a perfect fit.
What you can do is just take a couple of measurements on the door of your trailer to see if this particular lock will work well. It is designed for doors that are 1-1/4 inches to... view full answer...
With your trailer being 30 years old most parts are discontinued at this point so a lot of troubleshooting and redneck engineering is going to be involved. The closest I can find to a 2" x 72" door hinge for your broken door would be the 2" Wide Continuous Hinge - 6' Long - 1/4" Pin Diameter # MA54ZR.
If you're referring to a different part for your doors then please let me know. view full answer...
The Conventional Ramp Door Spring for 6' Wide Enclosed Trailer part # 362SA6 is designed for 38" to 69" wide trailer doors so this is what you'll want to use. The bar will actually be trimmed to fit your exact width. view full answer...
The Hopkins trailer wiring harness, part # HM42635, does fit your 2-door 2013 Jeep Wrangler as long as you don't have the factory tow package.
If you do have the tow package instead use part # HM40975-11933. view full answer...
Go To Results